Hri, Inc.

Joseph B McLean

Alfred G Comolli

James B MacArthur

A process for catalytic two-stage hydrogenation and liquefaction of coal with selective extinction recycle of all heavy liquid fractions boiling above a distillation cut point of about 600.degree.-750.degree. F. to produce increased yields of low-boiling hydrocarbon liquid and gas products. In the process, the particulate coal feed is slurried with a process-derived liquid solvent normally boiling above about 650.degree. F. and fed into a first stage catalytic reaction zone operated at conditions which promote controlled rate liquefaction of the coal, while simultaneously hydrogenating the hydrocarbon recycle oils. The first stage reactor is maintained at 710.degree.-800.degree. F. temperature, 1000-4000 psig hydrogen partial pressure, and 10-90 lb/hr per ft.sup.3 catalyst space velocity. Partially hydrogenated material withdrawn from the first stage reaction zone is passed directly to the second stage catalytic reaction zone maintained at 760.degree.-860.degree. F. temperature for further hydrogenation and hydroconversion reactions. A 600.degree.-750.degree. F..sup.+ fraction containing 0-20 W % unreacted coal and ash solids is recycled to the coal slurrying step. If desired, the cut point lower boiling fraction can be further catalytically hydrotreated. By this process, the coal feed is successively catalytically hydrogenated and hydroconverted at selected conditions, to provide significantly increased yields of desirable low-boiling hydrocarbon liquid products and minimal production of hydrocarbon gases, and no net production of undesirable heavy oils and residuum materials.

Catalytic two-stage coal hydrogenation process using extinction recycle

A process for two-stage catalytic co-processing of coal and heavy petroleum hydrocarbon liquid fractions to produce increased yields of low-boiling hydrocarbon liquid and gas products. In the process, the particulate coal is slurried with a petroleum residuum and optionally with a process-derived hydrocarbon liquid solvent and fed into a first stage catalytic reaction zone operated at relatively mild conditions which promote controlled rate liquefaction of the coal while simultaneously hydrogenating the petroleum and hydrocarbon recycle oils at conditions favoring hydrogenation reactions. The first stage reactor is maintained at 650.degree.-800.degree. F. temperature, 1000-4000 psig hydrogen partial pressure and 10-100 lb/hr/ft.sup.3 space velocity for the total coal and oil feed. From the first stage reaction zone, the partially hydrogenated effluent material is passed directly to the close-coupled second stage catalytic reaction zone maintained at more severe conditions of 750.degree.-900.degree. F. temperature for further catalytic; and hydrogenation and hydroconversion reactions. By this process, the blended coal and petroleum feed materials are successively catalytically hydrogenated and hydroconverted at the selected conditions, which results in significantly increased yields of desirable low-boiling hydrocarbon liquid products and minimal production of undesirable residuum and unconverted coal and hydrocarbon gases, while catalyst life is substantially increased.

Two-stage co-processing of coal/oil feedstocks

A process for two-stage catalytic hydrogenation and liquefaction of coal to produce increased yields of low-boiling hydrocarbon liquid and gas products. In the process, the particulate coal is slurried with a process-derived liquid solvent and fed at temperature below about 650.degree. F. into a first stage catalytic reaction zone operated at conditions which promote controlled rate liquefaction of the coal, while simultaneously hydrogenating the hydrocarbon recycle oils at conditions favoring hydrogenation reactions. The first stage reactor is maintained at 650.degree.-800.degree. F. temperature, 1000-4000 psig hydrogen partial pressure, and 10-60 lb coal/hr/ft.sup.3 reactor space velocity. The partially hydrogenated material from the first stage reaction zone is passed directly to the close-coupled second stage catalytic reaction zone maintained at a temperature at least about 25.degree. F. higher than for the first stage reactor and within a range of 750.degree.-875.degree. F. temperature for further hydrogenation and thermal hydroconversion reactions. By this process, the coal feed is successively catalytically hydrogenated and hydroconverted at selected conditions, which results in significantly increased yields of desirable low-boiling hydrocarbon liquid products and minimal production of undesirable residuum and unconverted coal and hydrocarbon gases, with use of less energy to obtain the low molecular weight products, while catalyst life is substantially increased.

Catalytic two-stage coal hydrogenation and hydroconversion process

A coal hydrogenation and liquefaction process in which particulate coal feed is pressurized to an intermediate pressure of at least 500 psig and slurried with CO.sub.2 liquid to provide a flowable coal/CO.sub.2 slurry feedstream, which is further pressurized to at least 1000 psig and fed into a catalytic reactor. The coal particle size is 50-375 mesh (U.S. Sieve Series) and provides 50-80 W % coal in the coal/CO.sub.2 slurry feedstream. Catalytic reaction conditions are maintained at 650.degree.-850.degree. F. temperature, 1000-4000 psig hydrogen partial pressure and coal feed rate of 10-100 lb coal/hr ft.sup.3 reactor volume to produce hydrocarbon gas and liquid products. The hydrogen and CO.sub.2 are recovered from the reactor effluent gaseous fraction, hydrogen is recycled to the catalytic reactor, and CO.sub.2 is liquefied and recycled to the coal slurrying step. If desired, two catalytic reaction stages close coupled together in series relation can be used. The process advantageously minimizes the recycle and processing of excess hydrocarbon liquid previously needed for slurrying the coal feed to the reactor(s).

Coal liquefaction process utilizing coal/CO.sub.2 slurry feedstream

A multi-stage catalytic process for hydrogenation and liquefaction of coal using ebullated-bed catalytic reactors to produce low-boiling hydrocarbon liquid products, in which used catalyst is removed from a lower temperature first stage reactor operating at temperature not exceeding about 800.degree. F. and cascaded forward to a higher temperature second stage reactor for further use therein. Reaction conditions in the first stage reactor are preferably 700.degree.-800.degree. F. temperature, 1000-4000 psig hydrogen partial pressure, and a coal feed rate of 10-90 lb coal/hr per ft.sup.3 catalyst settled volume in the reactor. Useful higher temperature or second stage reaction conditions are 750.degree.-850.degree. F. temperature, and 1000-4000 psig hydrogen partial pressure. The used catalyst withdrawn from the lower temperature of first stage reactor has a catalyst age of 300-3000 lb coal proceses/lb fresh catalyst, and is transferred forward to the higher temperature second stage reactor for further use to catalyst age of 1000-6000 lb coal processed per lb fresh catalyst. If desired, a higher temperature third catalytic reactor can be provided and used catalyst from the second stage reactor cascaded forward into the third reactor for further use therein. Useful catalysts include metal oxides of cobalt, iron, molybdenum, nickel, tin, or tungsten deposited on a base of alumina, magnesia, silica, or titania, with cobalt moly and nickel moly on alumina catalyst being preferred. This process advantageously requires a smaller quantity of fresh catalyst per ton of coal processed to produce the low-boiling hydrocarbon liquid products.

Growing community of inventors

S. Somerville, NJ, United States of America

Joseph B McLean