All.space Networks Ltd.

Isotropic Systems, Ltd.

John Finney

Jeremiah P Turpin

Clinton P Scarborough

Daniel F DiFonzo

Brian M Billman

Robert J Zavrel

Daniel Francis DiFonzo

Ergin Dinc

Zakaria Bouhanna

A ground antenna determines the current time and its own position from received signals that were transmitted by artificial earth satellites for communication. A high-gain multi-beam electrically-steered antenna is combined with a processing system to measure the angles between two or more satellites and determine the present distance to each satellite by the information broadcast on the TT&C channel. The knowledge of the angles and distances, as well as the trajectory of the satellites, can be combined with their locations as predicted by the satellite ephemeris data to triangulate the location of the receiver. This system is different from conventional GPS antennas because it does not require the cooperation of active communication with the satellites to derive a location estimate. The location is computed by the ground terminal, not by the satellite. This system can be used in cases where other locating services are offline, jammed, or otherwise unavailable to maintain location and time synchronization.

Non-cooperative position, navigation, and timing extraction from VSAT communications signals using multi-beam phased array antenna

Inhomogeneous dielectric lenses for electromagnetic waves can be produced by a process such as 3D printing to have controllable dielectric values. Dielectric values can be produced by a varying density of air voids within, for example, a dielectric matrix to obtain an effective overall density. Approaches in accordance with various embodiments can obtain uniform, isotropic dielectric properties without resonant behavior by the use of aperiodic distributions of nonuniformly-sized air voids. Target air fraction and distribution of air voids can be specified by a target dielectric constant through dielectric mixing rules, such as Maxwell-Garnet mixing rules, and a requirement for locally uniform distributions of air voids, while varying the density of the air voids across the overall structure to produce a desired gradient of dielectric properties.

Isotropic 3D-printed gradient-index RF lens

An antenna system that includes a plurality of lens sets. Each lens set includes a lens and at least one feed element. At least one feed element is aligned with the lens and configured to direct a signal through the lens at a desired direction.

Lens antenna system

A multibeam Radio Frequency (RF) lens antenna is designed as a receiver for Global Navigation Satellite System (GNSS) applications, such as GPS (Global Positioning System), Galileo, GLONASS, COMPASS, and others. The RF lens and plurality of associated feed elements and receiver circuits combine to form a plurality of resulting high-gain relatively narrow beams that, taken together, allow reception of signals from GNSS satellites over the entire upper hemisphere. Any kind of RF lens can be used, where the lens can be of homogeneous or inhomogeneous, dielectric or metamaterial/metasurface construction. The benefit of this approach to build a GNSS receiver over existing alternatives is increased gain and decreased noise at each receiver, which improves the signal to noise ratio (SNR) and improves the accuracy and reliability of the position and time measurements, while also reducing the impact of, and sensitivity to, interference, jamming, and spoofing signals. The approaches described in this patent can be combined with existing signal processing and accuracy improvement methods (such as Real-Time Kinematic (RTK), Precise-Point Positioning (PPP), and Differential GPS (DEPS)) for further benefits. This system has applications within the surveying, maritime, land mobility, aerospace, and government positioning market areas.

High-gain multibeam GNSS antenna

A field-assembled satellite communications terminal has a plurality of discrete, modular aperture blocks. Each aperture block contains an electrically steered antenna aperture, and a plurality of interconnection ports for power and data communications between the plurality of aperture blocks. The plurality of interconnection ports are removably connectable by the end user in the field. The terminal further has a signal processing system for receiving, processing, and generating signals to and from the apertures. The aperture blocks are connected to each other in the field and self-configure to form an electrically-steered antenna.

Field-assembled modular phased array SATCOM terminal

A system designs a thin and relatively flat microwave focusing lens that can produce multiple simultaneous beams, using readily-available isotropic dielectric materials, and having a gradient-index (GRIN) profile. The design optimizes the lens to achieve beam scanning and/or multiple beams over a wide field of regard (FOR) with broad bandwidth and a very short focal length compared with conventional lenses. The lens can be used individually or as an element in a more complex antenna having multiple lenses in various orientations that are independently switched, selected and/or excited simultaneously as elements in a phased array. The antenna terminal incorporates such lens into an array of lenses along with one or more feeds to produce single or multiple beams covering a broad field of regard for such applications as satellite communications on-the-move, cellular, broadband point-point or point-multipoint and other terrestrial or satellite communications systems. The lens and array design support multiple simultaneous independently steerable beams as well as null placement for interference cancellation.

System and method for providing a compact, flat, microwave lens with wide angular field of regard and wideband operation

A microwave prism is used to repoint an operational Direct-to-Home (DTH) or Very Small Aperture Terminal (VSAT) reflector antenna as part of a ground terminal to receive (or transmit) signals from a different satellite or orbital position without physically moving the reflector or the feed horn antenna. The microwave prism operates by shifting the radiated fields from the horn antenna generally perpendicular to the focal axis of the parabolic reflector in order to cause the main beam of the reflector to scan in response. For an existing reflector antenna receiving signals from an incumbent satellite, a prism has been designed to be snapped into place over the feed horn and shift the fields laterally by a calibrated distance. The structure of the prism is designed to be positioned and oriented correctly without the use of skilled labor. This system allows a satellite service provider to repoint their subscribers to a new satellite by shipping a self-install kit of the prism that is pre-configured to have the correct orientation and position on the feed antenna to correctly re-point the beam at a different satellite once the prism is applied. One benefit of the system is that unskilled labor, i.e., the subscribers themselves, can be used to repoint a large number of subscriber antennas in a satellite network rather than requiring the cost of a truck roll and a technician to visit every site. The microwave prisms to implement this functionality can be constructed in different ways, with homogeneous slabs or blocks, Gradient-Index (GRIN), multi-layered dielectric, geometric or graded-index Fresnel-zone, metasurface, or metamaterial prisms. The geometric and electrical constraints of the design are determined by the incumbent and target satellites, and the ground terminal location.

Prism for repointing reflector antenna main beam

A hybrid mechanical-lens array antenna is described that can be configured with different orientations and arrangements of the plurality of lenses within the array to control and enhance the performance at different regions of scan. This can include the addition of a secondary array (a skirt) at a large tilt angle, tilting the primary array, tilting the individual lenses within the primary array, or any combination. These design choices, when holding the number of lens modules (and, therefore, cost and power consumption) constant, have the effect of changing the system height, reducing the boresight gain and increasing the gain at scan, with each option showing different trades of height and scan and boresight performance.

Gain roll-off for hybrid mechanical-lens antenna phased arrays

A multibeam Radio Frequency (RF) lens antenna is designed as a receiver for Global Navigation Satellite System (GNSS) applications, such as GPS (Global Positioning System), Galileo, GLONASS, COMPASS, and others. The RF lens and plurality of associated feed elements and receiver circuits combine to form a plurality of resulting high-gain relatively narrow beams that, taken together, allow reception of signals from GNSS satellites over the entire upper hemisphere. Any kind of RF lens can be used, where the lens can be of homogeneous or inhomogeneous, dielectric or metamaterial metasurface construction. The benefit of this approach to build a GNSS receiver over existing alternatives is increased gain and decreased noise at each receiver, which improves the signal to noise ratio (SNR) and improves the accuracy and reliability of the position and time measurements, while also reducing the impact of, and sensitivity to, interference, jamming, and spoofing signals. The approaches described in this patent can be combined with existing signal processing and accuracy improvement methods (such as Real-Time Kinematic (RTK), Precise-Point Positioning (PPP), and Differential GPS (DEPS)) for further benefits. This system has applications within the surveying, maritime, land mobility, aerospace, and government positioning market areas.

A microwave prism is used to repoint an operational Direct-to-Home (DTH) or Very Small Aperture Terminal (VSAT) reflector antenna as part of a ground terminal to receive (or transmit) signals from a different satellite or orbital position without physically moving the reflector or the feed horn antenna. The microwave prism operates by shifting the radiated fields from the horn antenna generally perpendicular to the focal axis of the parabolic reflector in order to cause the main beam of the reflector to scan in response. For an existing reflector antenna receiving signals from an incumbent satellite, a prism has been designed to be snapped into place over the feed horn and shift the fields laterally by a calibrated distance. The structure of the prism is designed to be positioned and oriented correctly without the use of skilled labor. This system allows a satellite service provider to repoint their subscribers to a new satellite by shipping a self-install kit of the prism that is pre-configured to have the correct orientation and position on the feed antenna to correctly re-point the beam at a different satellite once the prism is applied. One benefit of the system is that unskilled labor, i.e., the subscribers themselves, can be used to repoint a large number of subscriber antennas in a satellite network rather than requiring the cost of a truck roll and a technician to visit every site. The microwave prisms to implement this functionality can be constructed in different ways, with homogeneous slabs or blocks, Gradient-Index (GRIN), multi-layered dielectric, geometric or graded-index Fresnel-zone, metasurface, or metamaterial prisms. The geometric and electrical constraints of the design are determined by the incumbent and target satellites and the ground terminal location.

Growing community of inventors

London, United Kingdom

John Finney